Commercial Pilot Training

 

North Coast Air provides all required training to achieve a Commercial Pilot's Certificate.

Commercial Pilot requirement for an airplane single-engine rating:

(1) Private Pilot Rating

(2) Proof of citezenship or TSA approval prior to the start of your training

Must log at least 250 hours of flight time as a pilot that consists of at least:

(3) 100 hours in powered aircraft, of which 50 hours must be in airplanes.

(4) 100 hours of pilot in command flight time, which includes at least

  • 50 hours in airplanes; and
  • 50 hours in cross country flight of which at least 10 hours must be in airplanes.

(5) 20 hours of training on the areas of operation that includes at least:

  • Ten hours of instrument training using a view limiting device including attitude instrument flying, partial panel skills, recovery from unusual flight attitudes, and intercepting and tracking navigational systems. Five hours of the 10 hours required on instrument training must be in a single engine airplane;
  • 10 hours of training in an airplane that has a retractable landing gear, flaps, and a controllable pitch propeller, or is turbine powered, or for an applicant seeking a single engine seaplane rating, 10 hours of training in a seaplane that has flaps and a controllable pitch propeller;
  • One 2 hour cross country flight in a single engine airplane in daytime conditions that consists of a total straight line distance of more than 100 nautical miles from the original point of departure;
  • One 2 hour cross country flight in a single engine airplane in nighttime conditions that consists of a total straight line distance of more than 100 nautical miles from the original point of departure; and
  • Three hours in a single engine airplane with an authorized instructor in preparation for the practical test within the preceding 2 calendar months from the month of the test.

(6) Ten hours of solo flight time in a single engine airplane or 10 hours of flight time performing the duties of pilot in command in a single engine airplane with an authorized instructor on board that include:

  • One cross country flight of not less than 300 nautical miles total distance, with landings at a minimum of three points, one of which is a straight line distance of at least 250 nautical miles from the original departure point. However, if this requirement is being met in Hawaii, the longest segment need only have a straight line distance of at least 150 nautical miles; and
  • 5 hours in night VFR conditions with 10 takeoffs and 10 landings (with each landing involving a flight in the traffic pattern) at an airport with an operating control tower.

(7) Written and Flight examinations

photo description   photo description   photo description   photo description